NEW! GLASSCOAT™ | COSMIC SPRITZ SPRAYCOAT

NEW! GLASSCOAT™ | COSMIC SPRITZ SPRAYCOAT

  • Extremly easy to use, no curing time need
  • Next coating generation
  • Primer adaption
  • No limited in using
  • Towels can reused
  • Greater Chemical Resistance
  • Extreme Durability
  • Produces a distinctive finish with the cold tones of silica and the warm tones of carnauba in a symphony of gloss.
  • Strong beading
  • Unique slick surface smoothness
  • Creates a thick layer of hardness
*:NOTE:* 2-Part System - Use INVINCIBLE | PRIMER or PRIMER SPRITZ before COSMIC SPRITZ SPRAYCOAT form the full hardness.

POLISHANGEL® GLASSCOAT™| COSMIC SPRITZ SPRAY is the latest developed spray coating with PRIMER adaption which allows us know to get a minimum protection up 12-14 months.

COSMIC SPRITZ SPRAYCOAT has a very high concentration Silica and Titanium Dioxide. Silica produces an extremely hard durable surface that protects against corrosion. Titanium dioxide provides extreme shine and color transparency.

COSMIC SPRITZ requires only a minimal amount of product to be effective. COSMIC SPRITZ leaves no residue on the plastic parts. Can be used as a drying aid.

Directions

Before COSMIC SPRITZ SPRAYCOAT Application:

  1. Thoroughly clean and decontaminate paint
  2. Use INVINCIBLE | PRIMER or PRIMER SPRITZ, which contains the hardeners for COSMIC SPRITZ SPRAYCOAT
  • * Work INVINCIBLE | PRIMER until it is nearly clear to ensure the hardeners are prepared to accept COSMIC SPRITZ SPRAYCOAT.
  • * If defects are severe, use MASTER COMPOUND prior to INVINCIBLE | PRIMER.
  • * The use of INVINCIBLE | PRIMER negates the need for any IPA or Panel Wipes prior to applying this coating.
  • * After using INVINCIBLE | PRIMER apply the first coat of COSMIC within 9 hours.

Alternatively, use PRIMER SPRITZ instead of PRIMER polish.

Application:

  1. Shake well before use
  2. Surface must be cool and out of direct sunlight
  3. Make sure surface is prepared and free of contamination before applying
  4. Spray a very small amount onto the paint surface or into a microfiber towel
  5. Then immediatley wipe on and off

For Relayering:

Allow 30 minutes after initial application before applying a second layer. Specific binding receptors ensure perfect cohesion. For perfect layering we reccomend to aplly 2 coats.

Curing:

  • * Wipe on & Wipe off no curing time need on surface
  • * The surface should not come in contact with heat or water in the following 12 hours
  • *  Over the 24 hours following application, the gloss & hardness will increase tremendously

After Care:

For after care we recommend washing the vehicle with GLASSCOAT SHAMPOO. Also use COSMIC SPRITZ SPRAYCOAT for maintenance without PRIMER.

Next

Previous

RELATED PRODUCTS